Brake Press Repair: Why You Need It?

Given the needs in today’s time, a hydraulic press brake can offer numerous capacities and even comes with some of the most advanced options. But, as they become more capable more than ever, press brake repair, as well as maintenance is needed to make sure that they are at their best performance all the time.

Doing the repair and maintenance should not be a big deal as they are often quick and simple. Here are some steps that you can apply that will be of big help and will make a great difference in the wear and tear of the system, its bending performance, and the lifespan of the press brake.


Look Around

When doing a brake press repair, make sure that you don’t miss even the smallest details. Start by taking a look on what’s around you. Then check the machine. By performing a visual inspection, you would be able to immediately see issues and address them before they become serious.


Take Precautions

The ram of the press brake should be supported at all times. This should be done before you do any type of maintenance work. Do this by placing the ram on two wooden blocks that are of equal sizes. Also, the electrical system should be locked out to you can ensure that it will not be engaged.


Check the Hydraulic Circuit

The hydraulic oil is among the most important aspects. This is even considered as the lifeblood of the bending system. Therefore, it is imperative that you keep it clean. At the same time, the reservoir is also critical. The level of the oil should be carefully checked because when it gets insufficient, it can cause erratic operations and can damage the hydraulic pump or shorten its life.


Review the Mechanical Equipment

The following are the mechanical components of your brake press machine repair: piston bolts, chain sprockets, and the guides. The following should also be checked two times in a year.

The connection between the pistons and ram need to be regularly and carefully checked. Also, all screws and bolts need to be checked to make sure that they have the right tightness. If they are loose, unscrew and replace them.


Examine the Electrical Equipment

You always need to make sure that all switches in the main panel and electrical connections in your press brake are annually checked. When doing so, do not forget to turn off the main power switch then you should lock out of the system.

However, there are also some checks that needs to be performed while the system is on. In this situation, do not miss to take all the necessary precautions. Also, be careful as you assemble and disassemble the parts of the press. All these need to be performed in a clean environment.

Just like any type of machine, maintenance is always a must. If you aim to have a safer workplace where there is no need to worry about safety, then performing repair and maintenance regularly should be done.